Original file

Mercedes-Benz Gl Bosch EDC17CP10 CR6Bin5-642-61N8-164XA-155kW-BIN5-my11_v3 / 1037510873

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Gl, hardware number CR6Bin5-642-61N8-164XA-155kW-BIN5-my11_v3 and software number 1037510873, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Gl3.0 diesel 210PS
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR6Bin5-642-61N8-164XA-155kW-BIN5-my11_v3
Software number
1037510873
Software / calibration
6429020701

Technical data

Vehicle
BrandMercedes-Benz
Car modelGl
Engine3.0 diesel 210PS
Power210.0PS / 154.5kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware numberCR6Bin5-642-61N8-164XA-155kW-BIN5-my11_v3
Software number1037510873
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMercedes Gl X164 EDC17CP01
File key3a1e643947f4ce54
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software1037510873Offset in the file: 0x18801A
Software / calibration6429020701Offset in the file: 0x181C56
Data set number6429039101Offset in the file: 0x181C61
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_61N8_CV101400///Offset in the file: 0x188BAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR6Bin5-642-61N8-164XA-155kW-BIN5-my11_v3 and software number 1037510873. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz GL350Flash2,048.00 KB€15Add to cart

All reads of CR6Bin5-642-61N8-164XA-155kW-BIN5-my11_v3 / 1037510873

Other pairs of Bosch EDC17CP10

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page