Original file
Mercedes-Benz W164 Bosch EDC17CP10 CR6Bin5-642-6HN0-164WA-155kW-Step3-ME10_01 / 1037500230
An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz W164, hardware number CR6Bin5-642-6HN0-164WA-155kW-Step3-ME10_01 and software number 1037500230, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz W1643.0 diesel 155KW
- Control unit
- Bosch EDC17CP10
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR6Bin5-642-6HN0-164WA-155kW-Step3-ME10_01
- Software number
- 1037500230
- Bosch part / software
- 1037516301
- Software / calibration
- 6429026800
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | W164 |
| Engine | 3.0 diesel 155KW |
| Control unit | Bosch EDC17CP10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR6Bin5-642-6HN0-164WA-155kW-Step3-ME10_01 |
| Software number | 1037500230 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | fc3c936485ea8c16 |
| ECU name | EDC17CP10 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1796 | |
| Bosch part / software | 1037516301 | Offset in the file: 0x02001A |
| Software / calibration | 6429026800 | Offset in the file: 0x00FC59 |
| Data set number | 6429030103 | Offset in the file: 0x1BA2F9 |
| Bosch project identifier (EPK) | 45/1/EDC17CP10/1/P695//P_695_6HN0_CV105100/// | Offset in the file: 0x042A00 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR6Bin5-642-6HN0-164WA-155kW-Step3-ME10_01 and software number 1037500230. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP10
| Hardware | Software | Vehicles |
|---|---|---|
| CR6Bin5-642-6EN5-GW463-155kW-EU5-AEJ2010-008_ME04 | 1037500230 | Mercedes-Benz G, Mercedes-Benz G350, Mercedes-Benz ML |
| CR6Bin5-642-6EN5-GW463-155kW-EU5-AEJ2010-008_ME04 | 1037543331 | Mercedes-Benz G350 |
| CR6Bin5-642-6HN0-164WA-155kW-BIN5-ME10_01 | 1037500230 | Mercedes-Benz GL, Mercedes-Benz R, Mercedes-Benz GL350 |
| CR6Bin5-642-6HN0-164WA-155kW-EU6-ME11_01 | 1037500230 | Mercedes-Benz GL350, Mercedes-Benz ML350 |
| CR6Bin5-642-6HN0-164WA-155kW-Step3-ME10_01 | 1037516330 | Mercedes-Benz |
| CR6Bin5-642-6HN0-164XA-155kW-BIN5-ME10_01 | 1037500230 | Mercedes-Benz GL, Mercedes-Benz ML 350 CDI |
| CR6Bin5-642-6HN0-164XA-155kW-BIN5-ME10_01 | 1037516337 | Mercedes-Benz GL350 |
| CR6Bin5-642-6HN0-164XA-155kW-EU6-ME10_01 | 1037516336 | Mercedes-Benz ML350 |