Original file
Mercedes-Benz ML350 Bosch EDC17CP10 CR6Bin5-642-6HN1-164XA-155kW-EU6-007_ME12 / 1037525423
An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz ML350, hardware number CR6Bin5-642-6HN1-164XA-155kW-EU6-007_ME12 and software number 1037525423, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz ML3503.0 diesel 231PS
- Control unit
- Bosch EDC17CP10
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR6Bin5-642-6HN1-164XA-155kW-EU6-007_ME12
- Software number
- 1037525423
- Software / calibration
- 6429025701
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | ML350 |
| Engine | 3.0 diesel 231PS |
| Power | 231PS / 169.9kW |
| Control unit | Bosch EDC17CP10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR6Bin5-642-6HN1-164XA-155kW-EU6-007_ME12 |
| Software number | 1037525423 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 5abb20c22baa0bd3 |
| ECU name | EDC17CP10 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037525423 | Offset in the file: 0x18801A |
| Software / calibration | 6429025701 | Offset in the file: 0x1843DA |
| Data set number | 6429039802 | Offset in the file: 0x1843E5 |
| Bosch project identifier (EPK) | 45/1/EDC17CP10/1/P695//P_695_6HN1_CV121400/// | Offset in the file: 0x188BAC |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR6Bin5-642-6HN1-164XA-155kW-EU6-007_ME12 and software number 1037525423. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP10
| Hardware | Software | Vehicles |
|---|---|---|
| CR6Bin5-642-6HN1-164WA-155kW-BIN5-007_ME12 | 1037500230 | Mercedes-Benz GL350 |
| CR6Bin5-642-6HN1-164WA-155kW-EU6-007_ME12 | 1037500230 | Mercedes-Benz R, Mercedes-Benz GL350, Mercedes-Benz GL |
| CR6Bin5-642-6HN1-164WA-155kW-Step3-007_ME12 | 1037500230 | Mercedes-Benz GL |
| CR6Bin5-642-6HN1-164XA-155kW-BIN5-007_ME12 | 1037500230 | Mercedes-Benz GL350 |
| CR6Bin5-642-6HN1-212SA-155kW-EU6-007_ME12 | 1037525427 | Mercedes-Benz E350 |
| CR6Bin5-642-6HN1-212WA-155kW-BIN5-007_ME12 | 1037500230 | Mercedes-Benz E350 |
| CR6Bin5-642-6HN1-212WA-155kW-EU6-007_ME12 | 1037500230 | Mercedes-Benz E-Class, Mercedes-Benz E350 |
| CR6Bin5-642-6HN1-212WA-155kW-EU6-007_ME12 | 1037525428 | Mercedes-Benz E350 |