Original file
Mercedes-Benz E-Class T-Model Bosch EDC17CP10 CR6EU5-642-46D3-CH4_NNW-212SA-170KW-EU5OP-016C_3_ME10C / 1037397161
An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E-Class T-Model, hardware number CR6EU5-642-46D3-CH4_NNW-212SA-170KW-EU5OP-016C_3_ME10C and software number 1037397161, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E-Class T-Model3.5 petrol 304PS
- Control unit
- Bosch EDC17CP10
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR6EU5-642-46D3-CH4_NNW-212SA-170KW-EU5OP-016C_3_ME10C
- Software number
- 1037397161
- Bosch part / software
- 1037501658
- Software / calibration
- 6429022000
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E-Class T-Model |
| Engine | 3.5 petrol 304PS |
| Fuel | Diesel |
| Power | 304.8PS / 224.2kW |
| Control unit | Bosch EDC17CP10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR6EU5-642-46D3-CH4_NNW-212SA-170KW-EU5OP-016C_3_ME10C |
| Software number | 1037397161 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| From the file name | L533CC0 |
| File key | 1282885630daa84e |
| ECU name | EDC17CP10 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1796 | |
| Bosch part / software | 1037501658 | Offset in the file: 0x02001A |
| Software / calibration | 6429022000 | Offset in the file: 0x00F010 |
| Data set number | 6429032401 | Offset in the file: 0x1BBC73 |
| Bosch project identifier (EPK) | 46/1/EDC17CP10/1/P695//P_695_46D3__CV092000/// | Offset in the file: 0x03FA70 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR6EU5-642-46D3-CH4_NNW-212SA-170KW-EU5OP-016C_3_ME10C and software number 1037397161. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP10
| Hardware | Software | Vehicles |
|---|---|---|
| CR6Bin5-642-6LN1-212WA-155kW-BIN5-004c_ME13 | 1037500230 | Mercedes-Benz E350, Mercedes-Benz E |
| CR6Bin5-642-6LN1-212WA-155kW-EU6-004c_ME13 | 1037500230 | Mercedes-Benz W212, Mercedes-Benz E / E Coupé, Mercedes-Benz E350 |
| CR6Bin5-642-6LN1-251VA-155kW-BIN5-004c_ME13_2 | 1037529345 | Mercedes-Benz GL |
| CR6Bin5-OM642-61N1-164XA-155kW-EU6-008_ME3_2 | 1037500246 | Mercedes-Benz ML |
| CR6EU5-642-46D3-CH4_NNW-212SA-170KW-EU5OP_4X4-016C_3_ME10C | 1037505825 | Mercedes-Benz E350 |
| CR6EU5-642-46D3-CH4_NNW-212WA-170KW-EU5OP-003C_OPT6_ME08C | 1037397161 | Mercedes-Benz |
| CR6EU5-642-46D3-CH4_NNW-212WA-170KW-EU5OP-003C_OPT6_ME08C | 1037501658 | Mercedes-Benz E |
| CR6EU5-642-46D3-Ch4_nNW-207CA-170kW-EU5OP-003c_Opt6_ME06c | 1037397116 | Mercedes-Benz E |