Original file
Mercedes-Benz ML 350CDI 2011 164.8KWKW Bosch EDC17CP10 CR6EU5-642-48D3-Ch4_nNW-164WA-170kW-EU5OP-002_1_ME03c / 1037505790
An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz ML 350CDI 2011 164.8KWKW, hardware number CR6EU5-642-48D3-Ch4_nNW-164WA-170kW-EU5OP-002_1_ME03c and software number 1037505790, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz ML 350CDI 2011 164.8KWKWdiesel 170KW
- Control unit
- Bosch EDC17CP10
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR6EU5-642-48D3-Ch4_nNW-164WA-170kW-EU5OP-002_1_ME03c
- Software number
- 1037505790
- Software / calibration
- 6429028700
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | ML 350CDI 2011 164.8KWKW |
| Engine | diesel 170KW |
| Displacement | 3.0 |
| Control unit | Bosch EDC17CP10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR6EU5-642-48D3-Ch4_nNW-164WA-170kW-EU5OP-002_1_ME03c |
| Software number | 1037505790 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| From the file name | MB ML 350CDI 2011 Bosch |
| File key | 8a59da010ca42547 |
| ECU name | EDC17CP10 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037505790 | Offset in the file: 0x18A01A |
| Software / calibration | 6429028700 | Offset in the file: 0x1BBA44 |
| Data set number | 6429036400 | Offset in the file: 0x1BBA4F |
| Bosch project identifier (EPK) | 46/1/EDC17CP10/1/P695//P_695_48D3__CV093800/// | Offset in the file: 0x18AA10 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR6EU5-642-48D3-Ch4_nNW-164WA-170kW-EU5OP-002_1_ME03c and software number 1037505790. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP10
| Hardware | Software | Vehicles |
|---|---|---|
| CR6EU5-642-46D3-Ch4_nNW-212WA-170kW-EU5OP-003c_Opt6_ME08c | 1037501658 | Mercedes-Benz CLASSE E 350 2009, Mercedes-Benz E |
| CR6EU5-642-48D2-CH4_NNW-204WSA-170KW-EU5OP-001_ME02C | 1037397161 | Mercedes-Benz C-Class |
| CR6EU5-642-48D2-Ch4_nNW-204WSA-170kW-EU5OP-001_ME02c | 1037501665 | Mercedes-Benz C350 |
| CR6EU5-642-48D3-CH4_NNW-164WA-150KW-EU5OP-002_1_ME03C | 1037505791 | Mercedes-Benz ML250 |
| CR6EU5-642-49D1-CH4_NNW-204WSA-170KW-EU5OP-015_ME08 | 1037397161 | Mercedes-Benz C, Mercedes-Benz E350, Mercedes-Benz C350 |
| CR6EU5-642-49D1-CH4_NNW-204WSA-170KW-EU5OP_4X4-015_ME08 | 1037397161 | Mercedes-Benz C, Mercedes-Benz E350, Mercedes-Benz C350 |
| CR6EU5-642-49D1-CH4_NNW-204WSA-170KW-EU5OP_4X4-015_ME08 | 1037512425 | Mercedes-Benz C, Mercedes-Benz E350 |
| CR6EU5-642-49D1-CH4_NNW-204WSA-170KW-EU5OP_4X4-017_ME09 | 1037397161 | Mercedes-Benz C |