Original file
Mercedes-Benz C Bosch EDC17CP10 CR6EU5-642-49D1-Ch4_nNW-204WSA-170kW-EU5OP_4x4-015_ME08 / 1037512425
An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz C, hardware number CR6EU5-642-49D1-Ch4_nNW-204WSA-170kW-EU5OP_4x4-015_ME08 and software number 1037512425, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Cdiesel 170KW
- Control unit
- Bosch EDC17CP10
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR6EU5-642-49D1-Ch4_nNW-204WSA-170kW-EU5OP_4x4-015_ME08
- Software number
- 1037512425
- Software / calibration
- 6429027700
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | C |
| Engine | diesel 170KW |
| Displacement | 3.0 |
| Control unit | Bosch EDC17CP10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR6EU5-642-49D1-Ch4_nNW-204WSA-170kW-EU5OP_4x4-015_ME08 |
| Software number | 1037512425 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 98edfa05de98ed94 |
| ECU name | EDC17CP10 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037512425 | Offset in the file: 0x18A01A |
| Software / calibration | 6429027700 | Offset in the file: 0x1BBB18 |
| Data set number | 6429039401 | Offset in the file: 0x1BBB23 |
| Bosch project identifier (EPK) | 46/1/EDC17CP10/1/P695//P_695_49D1__CV094900/// | Offset in the file: 0x18AA10 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR6EU5-642-49D1-Ch4_nNW-204WSA-170kW-EU5OP_4x4-015_ME08 and software number 1037512425. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP10
| Hardware | Software | Vehicles |
|---|---|---|
| CR6EU5-642-49D1-CH4_NNW-212WA-170KW-EU5OP_4X4-015_ME13 | 1037512435 | Mercedes-Benz E350, Mercedes-Benz E |
| CR6EU5-642-49D1-Ch4_nNW-204WSA-170kW-EU5OP-015_ME08 | 1037397161 | Mercedes-Benz C350 |
| CR6EU5-642-49D1-Ch4_nNW-204WSA-170kW-EU5OP-015_ME08 | 1037512422 | Mercedes-Benz C, Mercedes-Benz C350 |
| CR6EU5-642-49D1-Ch4_nNW-204WSA-170kW-EU5OP_4x4-015_ME08 | 1037397161 | Mercedes-Benz C300, Mercedes-Benz C350 |
| CR6EU5-642-49D1-Ch4_nNW-204XA-170kW-EU5OP-015_ME08 | 1037512426 | Mercedes-Benz GL350 |
| CR6EU5-642-49D1-Ch4_nNW-207CA-170kW-EU5OP-006_V2_1_ME08 | 1037508964 | Mercedes-Benz E350 V6 Blue Efficiency |
| CR6EU5-642-49D1-Ch4_nNW-207CA-170kW-EU5OP-015_ME09 | 1037397116 | Mercedes-Benz E350 Turbo Diesel 169.9KWKW |
| CR6EU5-642-49D1-Ch4_nNW-207CA-170kW-EU5OP-015_ME09 | 1037397161 | Mercedes-Benz E350, Mercedes-Benz E, Mercedes-Benz SIMON ! |