Original file

Mercedes-Benz ML-Class Bosch EDC17CP10 CR6EU5-642-49D2-CH4_NNW-164WA-170KW-EU5OP-007C_ME07 / 1037512423

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz ML-Class, hardware number CR6EU5-642-49D2-CH4_NNW-164WA-170KW-EU5OP-007C_ME07 and software number 1037512423, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML-Class3.0 diesel 223PS
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
CR6EU5-642-49D2-CH4_NNW-164WA-170KW-EU5OP-007C_ME07
Software number
1037512423
Bosch part / software
1037510863
Software / calibration
6429020601

Technical data

Vehicle
BrandMercedes-Benz
Car modelML-Class
Engine3.0 diesel 223PS
Power223.1PS / 164.1kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware numberCR6EU5-642-49D2-CH4_NNW-164WA-170KW-EU5OP-007C_ME07
Software number1037512423
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydd2c80196179518b
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
Bosch part / software1037510863Offset in the file: 0x02001A
Software / calibration6429020601Offset in the file: 0x03EA67
Data set number6429031102Offset in the file: 0x1BBB23
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49D2__CV101500///Offset in the file: 0x03FE3C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR6EU5-642-49D2-CH4_NNW-164WA-170KW-EU5OP-007C_ME07 and software number 1037512423. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz ML350Flash512.00 KB€15Add to cart
Mercedes-Benz MLFlash2,048.00 KB€15Add to cart

All reads of CR6EU5-642-49D2-CH4_NNW-164WA-170KW-EU5OP-007C_ME07 / 1037512423

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
CR6EU5-642-49D2-CH4_NNW-164WA-150KW-EU5OP-007C_ME071037397161Mercedes-Benz ML, Mercedes-Benz ML300, Mercedes-Benz ML-Class
CR6EU5-642-49D2-CH4_NNW-164WA-150KW-EU5OP-007C_ME071037512424Mercedes-Benz ML
CR6EU5-642-49D2-CH4_NNW-164WA-170KW-EU5OP-004_ME061037397161Mercedes-Benz ML, Mercedes-Benz ML 350 CDI 4 Matic
CR6EU5-642-49D2-CH4_NNW-164WA-170KW-EU5OP-007C_ME071037397161Mercedes-Benz ML, Mercedes-Benz ML350, Mercedes-Benz ML-Class
CR6EU5-642-49D2-Ch4_nNW-164WA-150kW-EU5OP-004_ME061037510863Mercedes-Benz ml 300cdi 2010 150KWKW, Mercedes-Benz ML
CR6EU5-642-49D2-Ch4_nNW-164WA-150kW-EU5OP-007c_ME071037397161Mercedes-Benz ML300
CR6EU5-642-49D2-Ch4_nNW-164WA-150kW-EU5OP-007c_ME071037512424Mercedes-Benz ML
CR6EU5-642-49D2-Ch4_nNW-164WA-170kW-EU5OP-007c_ME071037397161Mercedes-Benz ML350, Mercedes-Benz ML, Mercedes-Benz ML280

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page