Original file

Mercedes-Benz E-Class Bosch EDC17CP10 CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 / 1037397161

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E-Class, hardware number CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 and software number 1037397161, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E-Class3.0 diesel 230PS
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12
Software number
1037397161
Bosch part / software
10SW043178
Software / calibration
6429022000

Technical data

Vehicle
BrandMercedes-Benz
Car modelE-Class
Engine3.0 diesel 230PS
Power230.1PS / 169.2kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware numberCR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12
Software number1037397161
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameL533CC0
File keyd215ef9a25dca09e
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software10SW043178Offset in the file: 0x02001A
Software / calibration6429022000Offset in the file: 0x00F010
Data set number6429039513Offset in the file: 0x1BB723
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49DC__CV183400///Offset in the file: 0x03FE3C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 and software number 1037397161. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz E-Class CabrioletFlash2,048.00 KB€15Add to cart
Mercedes-Benz E350Flash2,048.00 KB€15Add to cart
Mercedes-Benz CFlash4,096.00 KB€15Add to cart
Mercedes-Benz CFlash2,048.00 KB€15Add to cart
Mercedes-BenzFlash2,048.00 KB€15Add to cart
Mercedes-Benz CFlash2,048.00 KB€15Add to cart
Mercedes-Benz EFlash2,048.00 KB€15Add to cart
Mercedes-Benz E350Flash4,096.00 KB€15Add to cart

All reads of CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 / 1037397161

Other pairs of Bosch EDC17CP10

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page