Original file
Mercedes-Benz E300 CDI Bosch EDC17CP10 CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 / 6429024403
An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E300 CDI, hardware number CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 and software number 6429024403, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E300 CDI3.0 diesel · 231.0PS / 169.9kW
- Control unit
- Bosch EDC17CP10
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12
- Software number
- 6429024403
- Bosch part / software
- 10SW043830
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E300 CDI |
| Engine | 3.0 diesel |
| Power | 231.0PS / 169.9kW |
| Control unit | Bosch EDC17CP10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 |
| Software number | 6429024403 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | eaa67af9155e709e |
| ECU name | EDC17CP10 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW043830 | Offset in the file: 0x18A01A |
| Software / calibration | 6429024403 | Offset in the file: 0x1BB718 |
| Data set number | 6429039513 | Offset in the file: 0x1BB723 |
| Bosch project identifier (EPK) | 46/1/EDC17CP10/1/P695//P_695_49DC__CV183400/// | Offset in the file: 0x18AED0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 and software number 6429024403. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP10
| Hardware | Software | Vehicles |
|---|---|---|
| CR6EU5-642-49DC-CH4_NNW-204XA-170KW-EU5OP-ME13 | 10SW046717 | Mercedes-Benz C |
| CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 | 1037397116 | Mercedes-Benz CLS350, Mercedes-Benz W212, Mercedes-Benz C |
| CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 | 1037397161 | Mercedes-Benz C, Mercedes-Benz E350, Mercedes-Benz E |
| CR6EU5-642-49DC-CH4_NNW-207CA-170KW-EU5OP-ME12 | 10SW043830 | Mercedes-Benz W212 |
| CR6EU5-642-49DC-CH4_NNW-212SA-150KW-EU5OP-ME16 | 1037397161 | Mercedes-Benz E, Mercedes-Benz E-Class |
| CR6EU5-642-49DC-CH4_NNW-212SA-150KW-EU5OP-ME16 | 10SW043839 | Mercedes-Benz E |
| CR6EU5-642-49DC-CH4_NNW-212SA-170KW-EU5OP-ME16 | 1037397161 | Mercedes-Benz E, Mercedes-Benz E350, Mercedes-Benz E-Class T-Model |
| CR6EU5-642-49DC-CH4_NNW-212SA-170KW-EU5OP-ME16 | 10SW043837 | Mercedes-Benz E, Mercedes-Benz C, Mercedes-Benz E350 |