Original file

Mercedes-Benz E Bosch EDC17CP10 CR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP_4X4-ME16 / 10SW043840

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E, hardware number CR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP_4X4-ME16 and software number 10SW043840, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Ediesel 170KW
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP_4X4-ME16
Software number
10SW043840
Software / calibration
6429024403

Technical data

Vehicle
BrandMercedes-Benz
Car modelE
Enginediesel 170KW
Displacement3.0
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware numberCR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP_4X4-ME16
Software number10SW043840
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameL533CC0
File key2b79d40c0ad4dd26
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software10SW043840Offset in the file: 0x18A01A
Software / calibration6429024403Offset in the file: 0x1BB718
Data set number6429030114Offset in the file: 0x1BB723
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49DC__CV183400///Offset in the file: 0x18AED0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP_4X4-ME16 and software number 10SW043840. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz EFlash2,048.00 KB€15Add to cart

All reads of CR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP_4X4-ME16 / 10SW043840

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
CR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP-ME161037397161Mercedes-Benz E, Mercedes-Benz E350, Mercedes-Benz W204
CR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP-ME161037400336Mercedes-Benz E350, Mercedes-Benz E-Class, Mercedes-Benz E
CR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP-ME1610SW043836Mercedes-Benz E
CR6EU5-642-49DC-CH4_NNW-212WA-170KW-EU5OP_4X4-ME161037397161Mercedes-Benz E
CR6EU5-642-49DC-Ch4_nNW-212SA-170kW-EU5OP_4x4-ME16043841Mercedes-Benz E350
CR6NFZ-642-35M3-906P-CHARGE3-140KW-EURO5_OP-006CMercedes-Benz Sprinter
CR6NFZ-642-55N5-906M-CHARGE4_LSU-OLA_3ZNW-140KW-EURO5_OP-ME31037500671Mercedes-Benz Sprinter219/319/419/519
CR6NFZ-642-55N5-906M-CHARGE4_LSU-OLA_3ZNW-140KW-EURO5_OP-ME31037501644Mercedes-Benz Sprinter, Mercedes-Benz Sprinter219 319 419 519, Mercedes-Benz Sprinter 319CDI 2010 Turbodiesel

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page