Original file

Land Rover Sport TDV6 258 BHP Bosch EDC17CP11 0281030445 / 1037530678

An original (stock) flash read of the Bosch EDC17CP11 control unit, fitted in Land Rover Sport TDV6 258 BHP, hardware number 0281030445 and software number 1037530678, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Sport TDV6 258 BHP3.0
Control unit
Bosch EDC17CP11
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0281030445
Software number
1037530678
Software / calibration
DPLA-12B684-PA

Technical data

Vehicle
BrandLand Rover
Car modelSport TDV6 258 BHP
Engine3.0
Control unit
Control unitBosch EDC17CP11
ECU makerBosch
Hardware number0281030445
Software number1037530678
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameLand Rover Sport 3.0 TDV6
File key9c440f9569ffacc6
Identification read from the file
ECU nameEDC17CP11
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037530678Offset in the file: 0x10001A
Software / calibrationDPLA-12B684-PAOffset in the file: 0x00FD00
Engine descriptionDPLA-14C204-PACOffset in the file: 0x0B7C2D
Bosch project identifier (EPK)36/1/EDC17_CP11/57/P592//P592R305///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP11 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281030445 and software number 1037530678. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP11

HardwareSoftwareVehicles
02810146711037523319Jaguar XF X250 2010y
02810154151037509067Citroën C6, Citroën C5
02810179141037511330Land Rover LR4 3.0L, Land Rover discovery4 3,0TDI
02810179141037519736Land Rover TDV6 2012 188.3KWKW
9X23-12K532-PRF1037397145Jaguar XF
9X23-12K532-PRF1037504013Jaguar XF 3.0d 176.5KWKW, Jaguar XF
9X23-12K532-PRG1037397040Jaguar XF
9X23-12K532-PRG1037397145Jaguar XF

Bosch EDC17CP11 original files

The Bosch EDC17CP11 unit page