Original file

Jaguar XF Bosch EDC17CP11 9X23-12K532-PRG / 1037513149

An original (stock) flash read of the Bosch EDC17CP11 control unit, fitted in Jaguar XF, hardware number 9X23-12K532-PRG and software number 1037513149, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XF3.0 · 211.0PS / 155.2kW
Control unit
Bosch EDC17CP11
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
9X23-12K532-PRG
Software number
1037513149
Software / calibration
9X2Q-14C204-PE

Technical data

Vehicle
BrandJaguar
Car modelXF
Engine3.0
FuelDiesel
Power211.0PS / 155.2kW
Control unit
Control unitBosch EDC17CP11
ECU makerBosch
Hardware number9X23-12K532-PRG
Software number1037513149
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3a4c075e5689ac87
Identification read from the file
ECU nameEDC17CP11
Read typeCalibration only (data set)
Bosch part / software1037513149Offset in the file: 0x02001A
Software / calibration9X2Q-14C204-PEOffset in the file: 0x0AFFD3
Bosch project identifier (EPK)36/1/EDC17_CP11/57/P592//P592C361///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP11 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9X23-12K532-PRG and software number 1037513149. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP11

Bosch EDC17CP11 original files

The Bosch EDC17CP11 unit page