Original file

Land Rover TDV8 2010 Turbo Diesel Bosch EDC17CP11 BH42-14C204-NTC / 1037508545

An original (stock) flash read of the Bosch EDC17CP11 control unit, fitted in Land Rover TDV8 2010 Turbo Diesel, hardware number BH42-14C204-NTC and software number 1037508545, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover TDV8 2010 Turbo Diesel4.4 · 313.0PS / 230.2kW
Control unit
Bosch EDC17CP11
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
BH42-14C204-NTC
Software number
1037508545
Vehicle maker's hardware number
BH42-12A650-NAC
Software / calibration
BH42-12B684-NA

Technical data

Vehicle
BrandLand Rover
Car modelTDV8 2010 Turbo Diesel
Engine4.4
FuelDiesel
Power313.0PS / 230.2kW
Control unit
Control unitBosch EDC17CP11
ECU makerBosch
Hardware numberBH42-14C204-NTC
Software number1037508545
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameLand Rover Range Rover 4.4
File key280755ce7d71fd89
Identification read from the file
ECU nameEDC17CP11
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037508545Offset in the file: 0x10001A
Vehicle maker's hardware numberBH42-12A650-NACOffset in the file: 0x1FFF1C
Software / calibrationBH42-12B684-NAOffset in the file: 0x00FD00
Engine descriptionBH42-14C204-NTCOffset in the file: 0x0B2E77
Bosch project identifier (EPK)36/1/EDC17_CP11/57/P724//P724C610///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP11 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BH42-14C204-NTC and software number 1037508545. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Rover 45Flash2,048.00 KB€15Add to cart

All reads of BH42-14C204-NTC / 1037508545

Other pairs of Bosch EDC17CP11

HardwareSoftwareVehicles
BH42-12K532-NTK1037508545Land Rover Range Rover
BH42-12K532-NTK1037523437Land Rover Defender
BH42-12K532-NTL1037508545Land Rover Range Rover, Land Rover Range Rover Sport, Land Rover LandRover Discovery4 3000TDV6
BH42-12K532-NTL1037527223Land Rover TDV8 2012 230.2KWKW, Land Rover Range Rover, Rover
BW93-12K532-PCC1037503566Jaguar XJ
CH22-10849-ED1037511330Rover
CH22-12K532-PSC1037511330Land Rover Discovery, Land Rover Range Rover Sport
CH22-12K532-PSC1037513444Land Rover Defender 3.0d 2012 Turbo, Land Rover Range Rover Sport, Rover

Bosch EDC17CP11 original files

The Bosch EDC17CP11 unit page