Original file

Land Rover Range Rover Bosch EDC17CP11 CK52-12K532-NRF / 1037523496

An original (stock) flash read of the Bosch EDC17CP11 control unit, fitted in Land Rover Range Rover, hardware number CK52-12K532-NRF and software number 1037523496, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover4.4 · 340.0PS / 250.1kW
Control unit
Bosch EDC17CP11
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
CK52-12K532-NRF
Software number
1037523496
Software / calibration
BH42-12B684-NA

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine4.4
FuelDiesel
Power340.0PS / 250.1kW
Control unit
Control unitBosch EDC17CP11
ECU makerBosch
Hardware numberCK52-12K532-NRF
Software number1037523496
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6f8a7985060ab849
Identification read from the file
ECU nameEDC17CP11
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037523496Offset in the file: 0x10001A
Software / calibrationBH42-12B684-NAOffset in the file: 0x00FD00
Engine descriptionCK52-14C204-NABOffset in the file: 0x0B38A1
Bosch project identifier (EPK)37/1/EDC17_CP11/57/P724//P724Q1010///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP11 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CK52-12K532-NRF and software number 1037523496. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP11

HardwareSoftwareVehicles
CK52-12K532-NAF1037523496Land Rover Range Rover 4.4 SDV8
CK52-12K532-NAG1037523496Land Rover Range Rover
CK52-12K532-NCC1037523496Land Rover Range Rover
CK52-12K532-NRE1037523496Land Rover Range Rover
CK52-12K532-NRF1037534440Land Rover Range Rover
CK52-12K532-NRG1037523496Land Rover Range Rover
CK52-12K532-NRG1037538543Land Rover Range Rover 4.4 TDV8
CK52-12K532-PBB1037523497Land Rover Range Rover Sport

Bosch EDC17CP11 original files

The Bosch EDC17CP11 unit page