Original file

Land Rover Range Rover Bosch EDC17CP11 DK62-12K532-PLC / 1037530678

An original (stock) flash read of the Bosch EDC17CP11 control unit, fitted in Land Rover Range Rover, hardware number DK62-12K532-PLC and software number 1037530678, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover3.0 diesel 256PS
Control unit
Bosch EDC17CP11
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
DK62-12K532-PLC
Software number
1037530678
Software / calibration
DPLA-12B684-PA

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine3.0 diesel 256PS
Power256.0PS / 188.3kW
Control unit
Control unitBosch EDC17CP11
ECU makerBosch
Hardware numberDK62-12K532-PLC
Software number1037530678
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye77058b1250345c8
Identification read from the file
ECU nameEDC17CP11
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037530678Offset in the file: 0x10001A
Software / calibrationDPLA-12B684-PAOffset in the file: 0x00FD00
Engine descriptionDPLA-14C204-PACOffset in the file: 0x0B7C2D
Bosch project identifier (EPK)36/1/EDC17_CP11/57/P592//P592R305///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP11 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DK62-12K532-PLC and software number 1037530678. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover Range RoverFlash2,048.00 KB€15Add to cart
Land Rover Range Rover SportFlash2,048.00 KB€15Add to cart
Land Rover SPORTFlash2,048.00 KB€15Add to cart
Land Rover Range Rover SportFlash2,048.00 KB€15Add to cart

All reads of DK62-12K532-PLC / 1037530678

Other pairs of Bosch EDC17CP11

HardwareSoftwareVehicles
DK52-12K532-PLC1037530678Land Rover Range Rover 3.0 TDV6, Land Rover Range Rover, Land Rover Range Rover Sport
DK52-12K532-PLD1037530678Land Rover Range Rover, Land Rover Vogue, Land Rover Range Rover Sport
DK52-12K532-PSC1037530678Land Rover Range Rover
DK62-12K532-PBD1037530678Land Rover Range Rover Sport
DK62-12K532-PLD1037530678Land Rover Range Rover, Land Rover Range Rover Sport, Land Rover Range Rover 3.0 TDV6
DK62-12K532-PMC1037530678Land Rover Range Rover Sport
DK62-12K532-PMD1037530678Land Rover Range Rover 3.0 TDV6, Land Rover Range Rover Sport, Rover
DK62-12K532-PRF1037530678Land Rover Range Rover

Bosch EDC17CP11 original files

The Bosch EDC17CP11 unit page