Original file

Audi Q5 2.0 TDI Bosch EDC17CP14 03L906019AR / 070113

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Audi Q5 2.0 TDI, hardware number 03L906019AR and software number 070113, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 2.0 TDI2.0 diesel 163.2PS / 120.0kW
Control unit
Bosch EDC17CP14
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906019AR
Software number
070113
Bosch part / software
10SW070113
Vehicle maker's hardware number
03L906022B

Technical data

Vehicle
BrandAudi
Car modelQ5 2.0 TDI
Engine2.0 diesel 163.2PS / 120.0kW
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number03L906019AR
Software number070113
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key686a4e856fdcb68b
Identification read from the file
ECU nameEDC17CP14
Read typeCalibration only (data set)
Bosch part / software10SW070113Offset in the file: 0x1A001A
Vehicle maker's hardware number03L906022BOffset in the file: 0x1BCACA
Software / calibration03L906019AR · version 9978Offset in the file: 0x1BCAE1
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P598//C598G3WB///Offset in the file: 0x1A0A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AR and software number 070113. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
03L906019AK1037561055Audi pcmflash
03L906019AN1037528329Volkswagen pcmflash
03L906019AN1037536647Volkswagen pcmflash
03L906019AP1037536648Volkswagen pcmflash
03L906019AR1037505968Audi Q5 2.0 TDI CR, Audi Q5
03L906019AR1037506176Audi Q5, Audi Q5 2.0 TDI CR DPF, Audi pcmflash
03L906019AR1037518746Audi Q5, Audi pcmflash, Audi Q5 2.0TDI
03L906019AR1037561791Audi Q5, Audi Q5 2.0 TDI CR, Audi pcmflash

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page