Original file

Audi Q5 2.0 TDI Bosch EDC17CP14 03L906019AS / 070114

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Audi Q5 2.0 TDI, hardware number 03L906019AS and software number 070114, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 2.0 TDI2.0 diesel 0.0PS / 0.0kW
Control unit
Bosch EDC17CP14
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906019AS
Software number
070114
Bosch part / software
10SW070114
Vehicle maker's hardware number
03L906022B

Technical data

Vehicle
BrandAudi
Car modelQ5 2.0 TDI
Engine2.0 diesel 0.0PS / 0.0kW
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number03L906019AS
Software number070114
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8397b26c1df21541
Identification read from the file
ECU nameEDC17CP14
Read typeFull read (boot area included)
Bosch part / software10SW070114Offset in the file: 0x1A001A
Vehicle maker's hardware number03L906022BOffset in the file: 0x1BCACA
Software / calibration03L906019AS · version 9978Offset in the file: 0x1BCAE1
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P598//C598G3WB///Offset in the file: 0x1A0A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AS and software number 070114. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
03L906019AR1037518746Audi Q5, Audi pcmflash, Audi Q5 2.0TDI
03L906019AR1037561791Audi Q5, Audi Q5 2.0 TDI CR, Audi pcmflash
03L906019AR10SW070113Audi
03L906019AS03L906019ASAudi Q5
03L906019AS1037500144Audi Q5
03L906019AS1037505967Audi Q5, Audi Q5 2.0 TDI CR, Audi Q5 2.0 TDI CR DPF
03L906019AS1037506177Audi Q5, Audi 8R 2.0 TDI, Audi Q5 2.0 TDI
03L906019AS1037516675Audi Q5, Audi Q5 2.0 TDI, Audi pcmflash

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page