Original file

Audi A4 Bosch EDC17CP14 03L906022 / 1037395495

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Audi A4, hardware number 03L906022 and software number 1037395495, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel
Control unit
Bosch EDC17CP14
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash with its EEPROM
Hardware number
03L906022
Software number
1037395495
Bosch part / software
1037563183
Vehicle maker's hardware number
03L906022B

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number03L906022
Software number1037395495
File
File typeOriginal flash read with its EEPROM
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A4 2.0 TDI EDC17CP14
File key7a88aeef123f9418
Identification read from the file
ECU nameEDC17CP14
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037563183Offset in the file: 0x02001A
Vehicle maker's hardware number03L906022BOffset in the file: 0x1BCACA
Software / calibration03L906022 · version 9978Offset in the file: 0x1BCAE1
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P598//C598G3WB///Offset in the file: 0x039CF4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906022 and software number 1037395495. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
03L906019L1037535327Audi pcmflash
03L906019L1037561054Audi pcmflash
03L906019M1037560503Audi pcmflash
03L906019M1037561007Audi pcmflash
03L9060221037505410Volkswagen pcmflash
03L9060221037518134Volkswagen pcmflash
03L9060221037560584Volkswagen pcmflash
03L9060221037563183Volkswagen pcmflash

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page