Original file

Audi A4 CR 2009 Turbo Bosch EDC17CP14 03L906022B / 1037500121

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Audi A4 CR 2009 Turbo, hardware number 03L906022B and software number 1037500121, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 CR 2009 Turbo2.0 diesel · 119.6PS / 88.0kW
Control unit
Bosch EDC17CP14
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906022B
Software number
1037500121
Software / calibration
03L906022MG

Technical data

Vehicle
BrandAudi
Car modelA4 CR 2009 Turbo
Engine2.0 diesel
Power119.6PS / 88.0kW
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number03L906022B
Software number1037500121
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A4 2.0 TDI CR
File key03fe6ec98b3cb2de
Identification read from the file
ECU nameEDC17CP14
Read typeCalibration only (data set)
Bosch part / software1037500121Offset in the file: 0x1A001A
Vehicle maker's hardware number03L906022BOffset in the file: 0x1BC07A
Software / calibration03L906022MG · version 4375Offset in the file: 0x1BC091
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P598//C598G3W1///Offset in the file: 0x1A0A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906022B and software number 1037500121. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
03L906022B1037500114Audi A4 CR 2010 Turbo
03L906022B1037500116Audi A4 CR 2010 Turbo
03L906022B1037500119Audi A4, Audi A5 CR 2010 Turbo, Volkswagen
03L906022B1037500120Audi A4 CR 2010 Turbo
03L906022B1037500142Audi A5 CR 2010 Turbo
03L906022B1037500144Audi Q5, Audi Q5 2.0TDI, Audi Q5 2.0 TDI CR
03L906022B1037500146Audi Q5 CR 2009 Turbo
03L906022B1037500187Audi A4 2.0TDI

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page