Original file

Audi A4 2.0TDI Bosch EDC17CP14 03L906022B / 1037561789

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Audi A4 2.0TDI, hardware number 03L906022B and software number 1037561789, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 2.0TDI2.0 diesel
Control unit
Bosch EDC17CP14
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906022B
Software number
1037561789
Software / calibration
03L906022HP

Technical data

Vehicle
BrandAudi
Car modelA4 2.0TDI
Engine2.0 diesel
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number03L906022B
Software number1037561789
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A4 EDC17CP14
File keye5cbbd41733555e1
Identification read from the file
ECU nameEDC17CP14
Read typeOBD read (no boot area)
Bosch part / software1037561789Offset in the file: 0x02001A
Vehicle maker's hardware number03L906022BOffset in the file: 0x1BCA7A
Software / calibration03L906022HP · version 9977Offset in the file: 0x1BCA91
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P598//C598G3W5///Offset in the file: 0x039C1C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906022B and software number 1037561789. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
03L906022B1037560925Audi A4 2.0TDI
03L906022B1037560946Audi A4 2.0TDI
03L906022B1037561029Audi Q5, Audi 8R
03L906022B1037561037Audi A4
03L906022B1037561790Audi A4 2.0TDI
03L906022B1037561792Audi Q5
03L906022B1037563151Audi A4, Audi A4 2.0 TDI, Audi pcmflash
03L906022B1037563183Audi A4, Audi A4 2.0 TDI, Audi A4 2.0 TDI (120) - 120hp

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page