Original file

Audi Bosch EDC17CP14 03L906022DM / 10SW069783

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Audi, hardware number 03L906022DM and software number 10SW069783, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi2.0 diesel 136PS
Control unit
Bosch EDC17CP14
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906022DM
Software number
10SW069783
Vehicle maker's hardware number
03L906022B

Technical data

Vehicle
BrandAudi
Engine2.0 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number03L906022DM
Software number10SW069783
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key492899d30c7a5a10
Identification read from the file
ECU nameEDC17CP14
Read typeOBD read (no boot area)
Bosch part / software10SW069783Offset in the file: 0x02001A
Vehicle maker's hardware number03L906022BOffset in the file: 0x1BCACA
Software / calibration03L906022DM · version 9981Offset in the file: 0x1BCAE1
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P598//C598G3WB///Offset in the file: 0x039CF4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906022DM and software number 10SW069783. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
03L906022DM1037505964Audi pcmflash, Audi A4 2.0TDI
03L906022DM1037517534Audi 2.0 TDI, Audi A4 2.0TDI
03L906022DM1037560505Audi pcmflash, Audi A4 2.0TDI
03L906022DM1037563703Audi A4 2.0, Audi pcmflash, Audi A4 2.0TDI
03L906022DT1037506186Volkswagen pcmflash
03L906022EA1037506168Volkswagen pcmflash
03L906022EA1037564009Volkswagen pcmflash
03L906022EL1037397819Volkswagen pcmflash

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page