Original file

Seat Exeo Bosch EDC17CP14 03L906022GE / 1037500161

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Seat Exeo, hardware number 03L906022GE and software number 1037500161, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Exeo2.0 diesel 211HP
Control unit
Bosch EDC17CP14
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906022GE
Software number
1037500161
Software / calibration
03L906022FT

Technical data

Vehicle
BrandSeat
Car modelExeo
Engine2.0 diesel 211HP
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number03L906022GE
Software number1037500161
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye3b6a2948decf6a4
Identification read from the file
ECU nameEDC17CP14
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037500161Offset in the file: 0x02001A
Vehicle maker's hardware number03L906022GEOffset in the file: 0x1BD04E
Software / calibration03L906022FT · version 4401Offset in the file: 0x1BD065
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P750//C750V3W7///Offset in the file: 0x03AAFC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906022GE and software number 1037500161. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
03L906022GE03L906019DFSeat
03L906022GE03L906022GESeat Exeo
03L906022GE1037400922Seat Exeo, Seat Exeo CR 2009 Turbo
03L906022GE1037500117Seat Exeo, Seat Exeo CR, Seat Exeo 2.0 TDI
03L906022GE1037501423Audi A4 2.0 TDI
03L906022GE1037501963Seat Exeo 2.0 TDI, Seat Exeo CR 2010 Turbo, Seat Exeo
03L906022GE1037501964Seat Exeo, Seat Q5 2.0 TDI CR, Seat Exeo 2.0 TDI CR
03L906022GE1037502317Seat Exeo, Seat A4 2.0 TDI, Seat Exeo 2.0 TDI

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page