Original file

Seat Exeo Bosch EDC17CP14 03L906022GE / 1037563148

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Seat Exeo, hardware number 03L906022GE and software number 1037563148, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Exeo2.0 diesel 140PS
Control unit
Bosch EDC17CP14
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906022GE
Software number
1037563148
Software / calibration
03L906019B

Technical data

Vehicle
BrandSeat
Car modelExeo
Engine2.0 diesel 140PS
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number03L906022GE
Software number1037563148
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye0aaae79ce38ea38
Identification read from the file
ECU nameEDC17CP14
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037563148Offset in the file: 0x02001A
Vehicle maker's hardware number03L906022GEOffset in the file: 0x1BD0A6
Software / calibration03L906019B · version 9978Offset in the file: 0x1BD0BD
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P750//C750V3W9///Offset in the file: 0x03AB74

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906022GE and software number 1037563148. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat ExeoFlash4,096.00 KB€15Add to cart
Seat ExeoFlash2,048.00 KB€15Add to cart
Volkswagen Eos 2.0 TDIFlash2,048.00 KB€15Add to cart
Seat Exeo 2.0 TDIFlash4,096.00 KB€15Add to cart
Seat ExeoFlash2,048.00 KB€15Add to cart

All reads of 03L906022GE / 1037563148

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
03L906022GE1037560992Seat
03L906022GE1037560993Volkswagen pcmflash, Seat
03L906022GE1037560994Seat A4, Audi
03L906022GE1037561506Seat Exeo
03L906022GE1037563150Seat Exeo, Seat Exeo 2.0 TDI CR, Seat Exeo 2.0 TDI
03L906022GE1037563174Seat Exeo, Seat Exeo 2.0 TDI
03L906022GE1037563179Seat Exeo, Seat pcmflash, Volkswagen
03L906022GE1037563180Seat Exeo, Seat A4, Audi

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page