Original file

Hyundai Santa Fe 2018y Bosch EDC17CP14 39103-2F345 / 1037526982

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Hyundai Santa Fe 2018y, hardware number 39103-2F345 and software number 1037526982, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai Santa Fe 2018y2.2 diesel
Control unit
Bosch EDC17CP14
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
39103-2F345
Software number
1037526982

Technical data

Vehicle
BrandHyundai
Car modelSanta Fe 2018y
Engine2.2 diesel
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number39103-2F345
Software number1037526982
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameHyundai Santa Fe 2018y 2.2
File keyb3b30bba431dcadb
Identification read from the file
ECU nameEDC17CP14
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037526982Offset in the file: 0x10001A
Vehicle maker's hardware number39103-2F345Offset in the file: 0x054558
Bosch project identifier (EPK)42/1/EDC17_CP14/147/P_1087//P_1087_LE1A///Offset in the file: 0x02D1A4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 39103-2F345 and software number 1037526982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
39101-2F9011037543396Hyundai ix35
39103-2F0501037516052Kia Sedona 2010y
39103-2F1101037511853Kia Sorento 2.2CRDi
39103-2F3301037528276Hyundai Santa Fe
39103-2F4301037509536Hyundai Santa Fe 2010y, Hyundai Santa Fe II
39103-2F4351037505345Hyundai Santa Fe
39103-2F4351037509537Hyundai Santa Fe
39103-2F4401037510004Hyundai Santa Fe, Hyundai Tucson

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page