Original file

Audi Q5 3.0 TDI Bosch EDC17CP14 8K1907401A / 1037396467

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Audi Q5 3.0 TDI, hardware number 8K1907401A and software number 1037396467, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 3.0 TDI3.0 diesel 239.3PS / 176.0kW
Control unit
Bosch EDC17CP14
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
8K1907401A
Software number
1037396467

Technical data

Vehicle
BrandAudi
Car modelQ5 3.0 TDI
Engine3.0 diesel 239.3PS / 176.0kW
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number8K1907401A
Software number1037396467
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2109a25cb6a82686
Identification read from the file
ECU nameEDC17CP14
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037396467Offset in the file: 0x02001A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P714//C714B3UH///Offset in the file: 0x03CB90

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K1907401A and software number 1037396467. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
8K1907401A1037396005Audi A5
8K1907401A1037396007Audi A5
8K1907401A1037396451Audi A5 3.0TDI
8K1907401A1037396465Audi A4 3.0 TDI, Audi A5 2008 Turbo Benzin, Audi A5
8K1907401A1037397833Audi A4, Audi A4 3.0 TDI CR, Audi A5 3.0 TDI
8K1907401A1037397834Audi A4
8K1907401A1037397836Audi A4 3.0 TDI CR, Audi A4, Audi A5
8K1907401A1037398807Audi Q5 3.0 TDI

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page