Original file

Audi pcmflash Bosch EDC17CP14 8K1907401G / 1037511924

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Audi pcmflash, hardware number 8K1907401G and software number 1037511924, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.7 diesel · 163.2PS / 120.0kW
Control unit
Bosch EDC17CP14
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8K1907401G
Software number
1037511924
Vehicle maker's hardware number
8K1907401A

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.7 diesel
Power163.2PS / 120.0kW
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number8K1907401G
Software number1037511924
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key69f4cd15198829a9
Identification read from the file
ECU nameEDC17CP14
Read typeFull read (boot area included)
Bosch part / software1037511924Offset in the file: 0x02001A
Vehicle maker's hardware number8K1907401AOffset in the file: 0x3A6E52
Software / calibration8K1907401G · version 0006Offset in the file: 0x3A6E6C
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P714//C714B3UO///Offset in the file: 0x03CD94

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K1907401G and software number 1037511924. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
8K1907401A1037536660Audi A5
8K1907401A1037536663Audi A5
8K1907401G1037400969Audi pcmflash
8K1907401G1037504885Audi pcmflash
8K1907401G1037516665Audi pcmflash
8K1907401K1037502383Audi pcmflash
8K1907401K1037504886Audi pcmflash
8K1907401K1037511914Audi pcmflash

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page