Original file

Audi A5 Bosch EDC17CP14 8K2907401A / 1037510999

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Audi A5, hardware number 8K2907401A and software number 1037510999, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A53.0 diesel
Control unit
Bosch EDC17CP14
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
8K2907401A
Software number
1037510999
Vehicle maker's hardware number
8K1907401A
Software / calibration
8K2907401

Technical data

Vehicle
BrandAudi
Car modelA5
Engine3.0 diesel
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware number8K2907401A
Software number1037510999
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A5 3.0 TDI EDC17CP14
File keyd11ea7ddf2bf0416
Identification read from the file
ECU nameEDC17CP14
Read typeOBD read (no boot area)
Bosch part / software1037510999Offset in the file: 0x02001A
Vehicle maker's hardware number8K1907401AOffset in the file: 0x3A6E52
Software / calibration8K2907401 · version 0004Offset in the file: 0x3A6E6C
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP14/5/P714//C714B3UO///Offset in the file: 0x03CD94

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K2907401A and software number 1037510999. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
8K29074011037502378Audi pcmflash
8K29074011037510999Audi pcmflash
8K29074011037516617Audi pcmflash
8K2907401A1037502389Audi pcmflash, Audi A5
8K2907401A1037511908Audi pcmflash
8K2907401A1037516682Audi pcmflash
8K2907401B1037503910Audi pcmflash
8K2907401B1037511913Audi pcmflash

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page