Original file

Hyundai Santa Fe Bosch EDC17CP14 F0DM502MCVERI1R2 / 1037528271

An original (stock) flash read of the Bosch EDC17CP14 control unit, fitted in Hyundai Santa Fe, hardware number F0DM502MCVERI1R2 and software number 1037528271, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai Santa Fe2.2 diesel · 197.0PS / 144.9kW
Control unit
Bosch EDC17CP14
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
F0DM502MCVERI1R2
Software number
1037528271
Vehicle maker's hardware number
39101-2F350

Technical data

Vehicle
BrandHyundai
Car modelSanta Fe
Engine2.2 diesel
Power197.0PS / 144.9kW
Control unit
Control unitBosch EDC17CP14
ECU makerBosch
Hardware numberF0DM502MCVERI1R2
Software number1037528271
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key958a4cefdca41165
Identification read from the file
ECU nameEDC17CP14
Read typeCalibration only (data set)
Bosch part / software1037528271Offset in the file: 0x08001A
Vehicle maker's hardware number39101-2F350Offset in the file: 0x040BF6
Bosch project identifier (EPK)42/1/EDC17_CP14/147/P_1087//P_1087_LF0A///Offset in the file: 0x080A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP14 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F0DM502MCVERI1R2 and software number 1037528271. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP14

HardwareSoftwareVehicles
8R0907401R1037516616Audi pcmflash
8R0907401S1037510991Audi pcmflash
8R0907401S1037516614Audi pcmflash
E1DM502ACVDRI3R01037528086Hyundai Santa Fe
F0DM502ACVERI3R21037546662Hyundai Santa Fe
F0XF502ACVERI1R21037528284Kia Sorento
F1SL502MCVERI1R01037544506Kia Sportage
L3CR-18881-BMazda CX-7, Mazda A4, Audi

Bosch EDC17CP14 original files

The Bosch EDC17CP14 unit page