Original file

Honda Accord Bosch EDC17CP16 0281018064 / 1037514718

An original (stock) flash read of the Bosch EDC17CP16 control unit, fitted in Honda Accord, hardware number 0281018064 and software number 1037514718, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Honda Accord2.2 208HP
Control unit
Bosch EDC17CP16
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0281018064
Software number
1037514718
Software / calibration
P1054V60

Technical data

Vehicle
BrandHonda
Car modelAccord
Engine2.2 208HP
FuelDiesel
Control unit
Control unitBosch EDC17CP16
ECU makerBosch
Hardware number0281018064
Software number1037514718
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key89c15ab51fdf28cb
Identification read from the file
ECU nameEDC17CP16
Read typeOBD read (no boot area)
ProcessorTC1792
Bosch part / software1037514718Offset in the file: 0x04001A
Software / calibrationP1054V60Offset in the file: 0x056998
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00FC58
Bosch project identifier (EPK)38/1/EDC17_CP16/159/P1054//P1054V60///Offset in the file: 0x056998

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP16 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018064 and software number 1037514718. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP16

HardwareSoftwareVehicles
1037502249Honda
1037514712Honda
02810167241037505275Honda CR-V
16800-RL0-G00037805-RFW-G0501037521537Honda CR-V III
37805-RFW-G0301037502249Honda Crv, Honda CR-V III, Honda CRV
37805-RFW-G0501037502249Honda CR-V IV, Honda CR-V, Honda CRV
37805-RFW-G0501037521537Honda CR-V, Honda CR-V IV
37805-RFW-G0601037502249Honda CR-V

Bosch EDC17CP16 original files

The Bosch EDC17CP16 unit page