Original file

Chevrolet Express 4500 2015y 6.6L Bosch EDC17CP18 12646250 / 1037510140

An original (stock) flash read of the Bosch EDC17CP18 control unit, fitted in Chevrolet Express 4500 2015y 6.6L, hardware number 12646250 and software number 1037510140, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chevrolet Express 4500 2015y 6.6L6.6 · 261PS
Control unit
Bosch EDC17CP18
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
12646250
Software number
1037510140
Software / calibration
P_654_EDC17CP18_V1003_254_0

Technical data

Vehicle
BrandChevrolet
Car modelExpress 4500 2015y 6.6L
Engine6.6
Power261PS
Control unit
Control unitBosch EDC17CP18
ECU makerBosch
Hardware number12646250
Software number1037510140
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameChevrolet Express 4500 2015y Duramax
File key62cd4410377c7f45
Identification read from the file
ECU nameEDC17CP18
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037510140Offset in the file: 0x01801A
Software / calibrationP_654_EDC17CP18_V1003_254_0Offset in the file: 0x0FFF04
Bosch project identifier (EPK)56/1/EDC17_CP18/21/P_654//P_654_EDC17CP18_V1003_254_0///Offset in the file: 0x0FFF04

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP18 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 12646250 and software number 1037510140. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP18

HardwareSoftwareVehicles
1037510180Chevrolet Express, Chevrolet Sierra, GMC
1037510183Chevrolet Silverado, Chevrolet Savana
1037510187GMC K3500, GMC SILVERADO, Chevrolet
1037510189Chevrolet Silverado, Chevrolet Chevrole Silverado E86 2016y
654_EDC17CP18_V1603_042_0Chevrolet
02810180851037510153Chevrolet silverado
126463241037510153Chevrolet Silverado
126539521037510183Chevrolet Silverado 2015y

Bosch EDC17CP18 original files

The Bosch EDC17CP18 unit page