Original file

Renault Scenic Bosch EDC17CP19 0556RD0370323R / 1037524839

An original (stock) flash read of the Bosch EDC17CP19 control unit, fitted in Renault Scenic, hardware number 0556RD0370323R and software number 1037524839, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Scenic
Control unit
Bosch EDC17CP19
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
0556RD0370323R
Software number
1037524839
Software / calibration
r1a2_

Technical data

Vehicle
BrandRenault
Car modelScenic
Control unit
Control unitBosch EDC17CP19
ECU makerBosch
Hardware number0556RD0370323R
Software number1037524839
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keya387376ade0ad827
Identification read from the file
ECU nameEDC17CP19
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software1037524839Offset in the file: 0x08001A
Software / calibrationr1a2_Offset in the file: 0x040078
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00CA8F
Bosch project identifier (EPK)34/1/EDC17_CP19/15/P_659//r1a2_///Offset in the file: 0x040078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP19 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0556RD0370323R and software number 1037524839. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP19

HardwareSoftwareVehicles
0281016227Renault Megane III
02810162281037524846Renault Scenic / Grand Scenic
02810181321037514802Renault Megane
02810181321037516528Renault Megane III
06441629071037503103Renault Scenic
1037539942659_03101037539141Renault Megane III
1037539942659_03101037539942Renault Megane III
4457900258677001731037504386Renault Scenic

Bosch EDC17CP19 original files