Original file

Volkswagen Transporter CR 2011 Turbo Bosch EDC17CP20 0281016272 / 1037518131

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter CR 2011 Turbo, hardware number 0281016272 and software number 1037518131, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter CR 2011 Turbo2.0 diesel · 102.0PS / 75.0kW
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0281016272
Software number
1037518131
Vehicle maker's hardware number
03L907309M
Software / calibration
03L906022CD

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter CR 2011 Turbo
Engine2.0 diesel
Power102.0PS / 75.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number0281016272
Software number1037518131
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Transporter 2.0 TDI CR
File key9db43cd7019540df
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037518131Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309MOffset in the file: 0x04AF00
Software / calibration03L906022CD · version 9118Offset in the file: 0x04AF1A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755D5B5///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016272 and software number 1037518131. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
1037515518Audi Q5 CR 2010 Turbodiesel
K1BY-14C204-CKFord Fiesta
02810161401037517561Audi A4 CR 2009 Turbo, Audi A4 CR 2010 Turbo
02810161411037517565Audi A4 2.0TDI 2010y
02810162721037518155Volkswagen Transporter CR 2011 Turbo
03L906019AB1037510304Volkswagen Transporter 2.0 TDI, Volkswagen Transporter T6, Volkswagen Transporter
03L906019AB1037514230Volkswagen Transporter 2.0 TDI
03L906019AB1037518158Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen Transporter PS CHIPTUNING

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page