Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019AB / 1037518158

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019AB and software number 1037518158, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 140PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019AB
Software number
1037518158
Vehicle maker's hardware number
03L907309M

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019AB
Software number1037518158
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd20d544f4722c73c
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
Bosch part / software1037518158Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309MOffset in the file: 0x04AF00
Software / calibration03L906019AB · version 9125Offset in the file: 0x04AF1A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755D5B5///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AB and software number 1037518158. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen Transporter PS CHIPTUNINGFlash4,096.00 KB€15Add to cart
Volkswagen Transporter T6Flash2,048.00 KB€15Add to cart
Volkswagen TransporterFlash · From the file name: VW Transporter 2.0 TDI CR2,048.00 KB€15Add to cart
Volkswagen Transporter 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906019AB / 1037518158

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
02810162721037518131Volkswagen Transporter CR 2011 Turbo
02810162721037518155Volkswagen Transporter CR 2011 Turbo
03L906019AB1037510304Volkswagen Transporter 2.0 TDI, Volkswagen Transporter T6, Volkswagen Transporter
03L906019AB1037514230Volkswagen Transporter 2.0 TDI
03L906019AB1037535348Volkswagen pcmflash, Volkswagen Transporter T6
03L906019AC1037505412Volkswagen Passat CR 2011 Turbo, Volkswagen pcmflash
03L906019AC1037513694Volkswagen Passat CR 2010 Turbo, Volkswagen pcmflash
03L906019AC1037563614Volkswagen pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page