Original file

Audi A5 2.0 TDI Bosch EDC17CP20 03L906019AL / 069900

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Audi A5 2.0 TDI, hardware number 03L906019AL and software number 069900, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A5 2.0 TDI2.0 diesel 170.0PS / 125.0kW
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906019AL
Software number
069900
Bosch part / software
10SW069900
Software / calibration
03L906022NP

Technical data

Vehicle
BrandAudi
Car modelA5 2.0 TDI
Engine2.0 diesel 170.0PS / 125.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019AL
Software number069900
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9c9fb1b5f404798e
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software10SW069900Offset in the file: 0x04001A
Vehicle maker's hardware number03L906019ALOffset in the file: 0x1AD6B4
Software / calibration03L906022NP · version 9979Offset in the file: 0x1AD6CB
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P850//C850F54C///Offset in the file: 0x056EDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AL and software number 069900. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019AL03L906022TNAudi A4
03L906019AL069413Audi A4
03L906019AL069420Audi A4
03L906019AL069580Audi A4
03L906019AL069901Audi A5 2.0 TDI
03L906019AL1037502339Audi A4, Audi A4 2.0 TDI CR, Audi A4 2.0 TDI CR DPF
03L906019AL1037502340Audi A4, Audi A4 2.0 TDI CR, Audi A5
03L906019AL1037502345Audi A4

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page