Original file

Audi A5 Bosch EDC17CP20 03L906019AL / 1037502340

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Audi A5, hardware number 03L906019AL and software number 1037502340, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A52.0 diesel 143PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019AL
Software number
1037502340
Software / calibration
03L906022NP

Technical data

Vehicle
BrandAudi
Car modelA5
Engine2.0 diesel 143PS
Power143PS / 105.2kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019AL
Software number1037502340
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A5 2.0 TDI CR
File key4e966ed9c150c3d8
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037502340Offset in the file: 0x04001A
Vehicle maker's hardware number03L906019ALOffset in the file: 0x1AD680
Software / calibration03L906022NP · version 5073Offset in the file: 0x1AD697
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P850//C850F521///Offset in the file: 0x056E74

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AL and software number 1037502340. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A4Flash · From the file name: Audi A4 B8 2.0 TDI2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4Flash512.00 KB€15Add to cart
Audi A5Flash · From the file name: Audi A5 2.0 TDI CR2,048.00 KB€15Add to cart
Audi A4 2.0LFlash · From the file name: Audi A4 EDC17CP202,048.00 KB€15Add to cart
Audi A5 2.0 TDI CRFlash2,048.00 KB€15Add to cart
Audi A4 2.0 TDI CRFlash2,048.00 KB€15Add to cart
Audi A4 2.0 TDI CRFlash2,048.00 KB€15Add to cart

All reads of 03L906019AL / 1037502340

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019AL069580Audi A4
03L906019AL069900Audi A5 2.0 TDI
03L906019AL069901Audi A5 2.0 TDI
03L906019AL1037502339Audi A4, Audi A4 2.0 TDI CR, Audi A4 2.0 TDI CR DPF
03L906019AL1037502345Audi A4
03L906019AL1037502346Audi A4, Audi A4 2.0 TDI, Audi A4 2.0 TDI CR
03L906019AL1037502349Audi A4, Audi A4 2.0, Audi A5
03L906019AL1037502350Audi A4, Audi A4 2.0 TDI CR, Audi A4 CR 2010 Turbo

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page