Original file

Audi A4 Bosch EDC17CP20 03L906019AL / 1037504861

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Audi A4, hardware number 03L906019AL and software number 1037504861, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel · 136.0PS / 100.0kW
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019AL
Software number
1037504861
Software / calibration
03L906019AT

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019AL
Software number1037504861
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydcb8bc6382cca24c
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037504861Offset in the file: 0x04001A
Vehicle maker's hardware number03L906019ALOffset in the file: 0x1AD6A0
Software / calibration03L906019AT · version 5486Offset in the file: 0x1AD6B7
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P850//C850F530///Offset in the file: 0x056E7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AL and software number 1037504861. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A4 2.0TDIFlash4,096.00 KB€15Add to cart
Audi A4 2.0 TDI CRFlash2,048.00 KB€15Add to cart
Audi A4 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906019AL / 1037504861

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019AL1037504769Audi A5, Audi A4 2.0TDI
03L906019AL1037504770Audi A5, Audi A5 CR 2005 Turbo, Audi A4 2.0TDI
03L906019AL1037504771Audi A4, Audi A4 B8
03L906019AL1037504773Audi A4, Audi A4 2.0 TDI, Audi A4 CR 2010 Turbo
03L906019AL1037504862Audi A4 2.0 TDI, Audi A4 2.0TDI
03L906019AL1037504882Audi A4, Audi A4 2.0TDI
03L906019AL1037504883Audi A4, Audi A4 B8
03L906019AL1037504900Audi A4, Audi A4 2.0TDI

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page