Original file

Audi Bosch EDC17CP20 03L906019AL / 1037563158

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Audi, hardware number 03L906019AL and software number 1037563158, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
AudiCAGA · 142.8PS / 105.0kW
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019AL
Software number
1037563158
Software / calibration
03L906022NN

Technical data

Vehicle
BrandAudi
EngineCAGA
FuelDiesel
Displacement2.0
Power142.8PS / 105.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019AL
Software number1037563158
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key61dfb4fc1412f687
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037563158Offset in the file: 0x04001A
Vehicle maker's hardware number03L906019ALOffset in the file: 0x1AD6B4
Software / calibration03L906022NN · version 9980Offset in the file: 0x1AD6CB
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P850//C850F54C///Offset in the file: 0x056EDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AL and software number 1037563158. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4 2.0TDIFlash4,096.00 KB€15Add to cart
Audi A5Flash2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4Flash4,096.00 KB€15Add to cart
Audi A4Flash4,096.00 KB€15Add to cart
Audi A4Flash4,096.00 KB€15Add to cart
Audi A5Flash2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart

All reads of 03L906019AL / 1037563158

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019AL1037561048Audi A4, Audi B8, Audi A4 2.0TDI
03L906019AL1037563146Audi A4, Audi A4 2.0 TDI (120) -, Audi A4 2.0 TDI (120) - 120hp
03L906019AL1037563147Audi A4 2.0 TDI, Audi A4 2.0 TDI 136 pk CR DPF, Audi A4 2.0 TDI CR
03L906019AL1037563149Audi A4, Audi A4 2.0 TDI, Audi A4 2.0TDI
03L906019AL1037563159Audi A4, Audi A4 2.0 TDI, Audi A3 - A3 Berline
03L906019AL1037563190Audi A4, Audi A4 2.0 TDI, Audi A4 2.0TDI
03L906019AL1037563191Audi A4 Allroad Quattro 2.0 TDI, Audi A4, Audi A4 2.0TDI
03L906019AL10SW069147Audi A4

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page