Original file

Audi A4 Bosch EDC17CP20 03L906019AL / 1037563191

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Audi A4, hardware number 03L906019AL and software number 1037563191, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel · 163.0PS / 119.9kW
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
03L906019AL
Software number
1037563191
Software / calibration
03L906022TK

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019AL
Software number1037563191
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6f02a01c105d5db7
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
Bosch part / software1037563191Offset in the file: 0x04001A
Vehicle maker's hardware number03L906019ALOffset in the file: 0x2AA6B4
Software / calibration03L906022TK · version 9978Offset in the file: 0x2AA6CB
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x027C54
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P850//C850F54C///Offset in the file: 0x056EDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AL and software number 1037563191. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A4 2.0TDIFlash4,096.00 KB€15Add to cart
AudiFlash4,096.00 KB€15Add to cart
Audi A4 Allroad Quattro 2.0 TDIFlash4,096.00 KB€15Add to cart

All reads of 03L906019AL / 1037563191

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019AL1037563149Audi A4, Audi A4 2.0 TDI, Audi A4 2.0TDI
03L906019AL1037563158Audi A4, Audi A4 2.0 TDI (143) - 143hp, Audi A5
03L906019AL1037563159Audi A4, Audi A4 2.0 TDI, Audi A3 - A3 Berline
03L906019AL1037563190Audi A4, Audi A4 2.0 TDI, Audi A4 2.0TDI
03L906019AL10SW069147Audi A4
03L906019AL10SW069147 P850F54CAudi A4 2.0 TDI
03L906019AL10SW069413Audi A4
03L906019AL10SW069420Audi

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page