Original file

Audi A4 2.0 TDI Bosch EDC17CP20 03L906019AL / 10SW070334 P850F54C

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Audi A4 2.0 TDI, hardware number 03L906019AL and software number 10SW070334 P850F54C, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 2.0 TDI2.0 diesel 143PS
Control unit
Bosch EDC17CP20
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906019AL
Software number
10SW070334 P850F54C
Bosch part / software
10SW070334
Software / calibration
03L906022RL

Technical data

Vehicle
BrandAudi
Car modelA4 2.0 TDI
Engine2.0 diesel 143PS
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019AL
Software number10SW070334 P850F54C
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyab5b9955fe35afa9
Identification read from the file
ECU nameEDC17CP20
Read typeCalibration only (data set)
Bosch part / software10SW070334Offset in the file: 0x18301A
Vehicle maker's hardware number03L906019ALOffset in the file: 0x1AD6B4
Software / calibration03L906022RL · version 9979Offset in the file: 0x1AD6CB
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P850//C850F54C///Offset in the file: 0x183A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AL and software number 10SW070334 P850F54C. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019AL10SW069901 P850F54CAudi A4 2.0 TDI
03L906019AL10SW069906Audi
03L906019AL10SW070333Audi
03L906019AL10SW070334Audi
03L906019AL10SW070335Audi
03L906019AL55488072Opel Insignia
03L906019AM1037509988Volkswagen Transporter, Volkswagen Golf CR 2009 Turbo, Volkswagen pcmflash
03L906019AM1037518157Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Transporter T6

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page