Original file

Audi Bosch EDC17CP20 03L906019AL / 10SW070335

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Audi, hardware number 03L906019AL and software number 10SW070335, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi2.0 diesel 142PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
03L906019AL
Software number
10SW070335
Software / calibration
03L906022RJ

Technical data

Vehicle
BrandAudi
Engine2.0 diesel 142PS
Power142.8PS / 105.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019AL
Software number10SW070335
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8b69e1d66ba51fee
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
Bosch part / software10SW070335Offset in the file: 0x04001A
Vehicle maker's hardware number03L906019ALOffset in the file: 0x1AD6B4
Software / calibration03L906022RJ · version 9979Offset in the file: 0x1AD6CB
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P850//C850F54C///Offset in the file: 0x056EDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019AL and software number 10SW070335. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019AL10SW069906Audi
03L906019AL10SW070333Audi
03L906019AL10SW070334Audi
03L906019AL10SW070334 P850F54CAudi A4 2.0 TDI
03L906019AL55488072Opel Insignia
03L906019AM1037509988Volkswagen Transporter, Volkswagen Golf CR 2009 Turbo, Volkswagen pcmflash
03L906019AM1037518157Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Transporter T6
03L906019AM10SW086471Volkswagen Transporter

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page