Original file

Multicar Tremo X56 Bosch EDC17CP20 03L906019BA / 1037505935

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Multicar Tremo X56, hardware number 03L906019BA and software number 1037505935, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Multicar Tremo X562.0 102PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019BA
Software number
1037505935
Software / calibration
C864CJ3WL

Technical data

Vehicle
BrandMulticar
Car modelTremo X56
Engine2.0 102PS
Power102.0PS / 75kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019BA
Software number1037505935
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7b61a1bbb879a077
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037505935Offset in the file: 0x02001A
Software / calibrationC864CJ3WLOffset in the file: 0x03B45C
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FB1E
Bosch project identifier (EPK)36/1/EDC17_CP20/3/P864//C864CJ3WL///Offset in the file: 0x03B45C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019BA and software number 1037505935. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
VolkswagenFlash2,048.00 KB€15Add to cart

All reads of 03L906019BA / 1037505935

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019AT1037505478Audi pcmflash
03L906019AT1037518002Audi pcmflash
03L906019AT1037560900Audi pcmflash
03L906019AT1037563147Audi pcmflash
03L906019BA1037531625Volkswagen PassatCC
03L906019BA1037536654Volkswagen PassatCC, Volkswagen Heftruck, Linde
03L906019BA1037544728Volkswagen
03L906019C1037504862Audi pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page