Original file

Audi pcmflash Bosch EDC17CP20 03L906019C / 1037560559

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Audi pcmflash, hardware number 03L906019C and software number 1037560559, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 136PS
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906019C
Software number
1037560559
Vehicle maker's hardware number
03L906019AL

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019C
Software number1037560559
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb4b43e618113c734
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software1037560559Offset in the file: 0x04001A
Vehicle maker's hardware number03L906019ALOffset in the file: 0x1AD6B4
Software / calibration03L906019C · version 9977Offset in the file: 0x1AD6CB
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P850//C850F54C///Offset in the file: 0x056EDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019C and software number 1037560559. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019BA1037544728Volkswagen
03L906019C1037504862Audi pcmflash
03L906019C1037505902Audi pcmflash
03L906019C1037515518Audi pcmflash
03L906019C1037563149Audi pcmflash
03L906019CP1037518107Volkswagen Amarok 2.0 BiTDI, Volkswagen Amarok
03L906019CP1037526347Volkswagen Amarok 2.0 BiTDI, Volkswagen Amarok
03L906019CP1037561062Volkswagen pcmflash, Volkswagen Amarok

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page