Original file

Volkswagen Transporter 2.0 TDI Bosch EDC17CP20 03L906019DG / 1037509996

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter 2.0 TDI, hardware number 03L906019DG and software number 1037509996, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter 2.0 TDI2.0 diesel 140.0PS / 103.0kW
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906019DG
Software number
1037509996
Vehicle maker's hardware number
03L907309K

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter 2.0 TDI
Engine2.0 diesel 140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019DG
Software number1037509996
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8fb1ab083c62b393
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software1037509996Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309KOffset in the file: 0x04C090
Software / calibration03L906019DG · version 7544Offset in the file: 0x04C0AA
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755D5A1///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019DG and software number 1037509996. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019DD1037519394Volkswagen Transporter, Volkswagen Transporter CR 2010 Turbo
03L906019DD1037521642Volkswagen Transporter 2.0 TDI CR DPF, Volkswagen pcmflash, Volkswagen Transporter
03L906019DD1037525573Volkswagen Transporter, Volkswagen pcmflash
03L906019DD10SW086532Volkswagen Transporter
03L906019DG1037515267Volkswagen T6 2.0 TDI CR, Volkswagen Transporter 2.0 TDI
03L906019DG1037518153Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen Transporter CR 2011 Turbo
03L906019DG10SW086387Volkswagen Transporter
03L906019DH086399Volkswagen Transporter 2.0 TDI

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page