Original file

Volkswagen Transporter CR 2011 Turbo Bosch EDC17CP20 03L906019DM / 1037514232

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter CR 2011 Turbo, hardware number 03L906019DM and software number 1037514232, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter CR 2011 Turbo2.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17CP20
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906019DM
Software number
1037514232
Vehicle maker's hardware number
03L907309K

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter CR 2011 Turbo
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019DM
Software number1037514232
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Transporter 2.0 TDI CR
File key7627dabdcf9d8574
Identification read from the file
ECU nameEDC17CP20
Read typeCalibration only (data set)
Bosch part / software1037514232Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309KOffset in the file: 0x04AD80
Software / calibration03L906019DM · version 8291Offset in the file: 0x04AD9A
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755D5B2///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019DM and software number 1037514232. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen TransporterFlash2,048.00 KB€15Add to cart
Volkswagen Transporter 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906019DM / 1037514232

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019DL1037518138Volkswagen Transporter, Volkswagen Transporter 2.0 TDI
03L906019DL1037528304Volkswagen Transporter, Volkswagen pcmflash
03L906019DL10SW086385Volkswagen Transporter
03L906019DM1037509991Volkswagen Transporter 2.0 TDI
03L906019DM1037518160Volkswagen Transporter, Volkswagen Transporter 2.0 TDI
03L906019DM1037535346Volkswagen pcmflash, Volkswagen Transporter
03L906019DN1037510305Volkswagen Transporter 2.0 TDI
03L906019DN1037515294Volkswagen Transporter 2.0 TDI

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page