Original file

Volkswagen Transporter 2.0 TDI Bosch EDC17CP20 03L906019DQ / 1037515296

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter 2.0 TDI, hardware number 03L906019DQ and software number 1037515296, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter 2.0 TDI2.0 diesel 140.0PS / 103.0kW
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906019DQ
Software number
1037515296
Vehicle maker's hardware number
03L907309K

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter 2.0 TDI
Engine2.0 diesel 140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019DQ
Software number1037515296
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf6dc4a14f8090322
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software1037515296Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309KOffset in the file: 0x04AD80
Software / calibration03L906019DQ · version 8735Offset in the file: 0x04AD9A
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755D5B2///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019DQ and software number 1037515296. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019DP1037515295Volkswagen Transporter 2.0 TDI
03L906019DP1037518125Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Caravelle
03L906019DP10SW086389Volkswagen Transporter
03L906019DQ1037510321Volkswagen Transporter 2.0 TDI
03L906019DQ1037518126Volkswagen pcmflash, Volkswagen Transporter
03L906019DR1037507671Volkswagen Transporter
03L906019DR1037510306Volkswagen pcmflash
03L906019DR1037515297Volkswagen Transporter 2.0 TDI

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page