Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019ES / 1037519395

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019ES and software number 1037519395, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 84PS
Control unit
Bosch EDC17CP20
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906019ES
Software number
1037519395
Vehicle maker's hardware number
03L907309L

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 84PS
Power84PS / 61.8kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019ES
Software number1037519395
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Transporter 2.0 TDI CR
File key16e60e5b6a11e646
Identification read from the file
ECU nameEDC17CP20
Read typeCalibration only (data set)
Bosch part / software1037519395Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309LOffset in the file: 0x058248
Software / calibration03L906019ES · version 2118Offset in the file: 0x058262
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WL///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019ES and software number 1037519395. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019EN1037561093Volkswagen Amarok
03L906019EQ1037515501Volkswagen Transporter 2.0 TDI
03L906019EQ1037518161Volkswagen Transporter, Volkswagen pcmflash
03L906019ES1037518114Volkswagen pcmflash
03L906019ES1037521638Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Transporter T6
03L906019ES1037525567Volkswagen Transporter, Volkswagen pcmflash
03L906019ES10SW086533Volkswagen Transporter
03L906019ET1037518115Volkswagen Transporter 2.0 TDI

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page