Original file

Volkswagen pcmflash Bosch EDC17CP20 03L906019F / 1037518102

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen pcmflash, hardware number 03L906019F and software number 1037518102, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash2.0 diesel 163PS
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906019F
Software number
1037518102
Vehicle maker's hardware number
03L907309K

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Engine2.0 diesel 163PS
Power163.2PS / 120.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019F
Software number1037518102
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyda84a54f76fa0078
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software1037518102Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309KOffset in the file: 0x04E634
Software / calibration03L906019F · version 9104Offset in the file: 0x04E64E
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755W5B5///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019F and software number 1037518102. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019ES10SW086533Volkswagen Transporter
03L906019ET1037518115Volkswagen Transporter 2.0 TDI
03L906019ET1037521640Volkswagen Transporter 2.0 TDI
03L906019ET1037525569Volkswagen pcmflash, Volkswagen Transporter
03L906019F1037561065Volkswagen pcmflash
03L906019FA03L907309KVolkswagen Amarok
03L906019FA073459Volkswagen Amarok 2.0 BiTDI
03L906019FA1037510908Volkswagen Amarok

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page