Original file

Volkswagen Amarok 2.0 BiTDI Bosch EDC17CP20 03L906019FA / 073459

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Amarok 2.0 BiTDI, hardware number 03L906019FA and software number 073459, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Amarok 2.0 BiTDI2.0 diesel 0.0PS / 0.0kW
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906019FA
Software number
073459
Bosch part / software
10SW073459
Vehicle maker's hardware number
03L907309K

Technical data

Vehicle
BrandVolkswagen
Car modelAmarok 2.0 BiTDI
Engine2.0 diesel 0.0PS / 0.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019FA
Software number073459
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key79ed6077f81a7f78
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software10SW073459Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309KOffset in the file: 0x04E634
Software / calibration03L906019FA · version 9979Offset in the file: 0x04E64E
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755W5B5///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019FA and software number 073459. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019ET1037525569Volkswagen pcmflash, Volkswagen Transporter
03L906019F1037518102Volkswagen pcmflash
03L906019F1037561065Volkswagen pcmflash
03L906019FA03L907309KVolkswagen Amarok
03L906019FA1037510908Volkswagen Amarok
03L906019FA1037515253Volkswagen Amarok 2.0 TDI CR, Volkswagen Amarok CR 2011 Turbo, Volkswagen pcmflash
03L906019FA1037518080Volkswagen Amarok
03L906019FA1037518108Volkswagen Amarok, Volkswagen Amarok CR 2011 Turbo, Volkswagen Amarok 2.0 BiTDI

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page