Original file

Volkswagen Amarok Bosch EDC17CP20 03L906019FA / 1037518080

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Amarok, hardware number 03L906019FA and software number 1037518080, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Amarok2.0 diesel 163PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019FA
Software number
1037518080
Bosch part / software
10SW073459
Vehicle maker's hardware number
03L907309K

Technical data

Vehicle
BrandVolkswagen
Car modelAmarok
Engine2.0 diesel 163PS
Power163.2PS / 120.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019FA
Software number1037518080
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf50d7b5f6007880d
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software10SW073459Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309KOffset in the file: 0x04E634
Software / calibration03L906019FA · version 9979Offset in the file: 0x04E64E
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755W5B5///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019FA and software number 1037518080. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019FA03L907309KVolkswagen Amarok
03L906019FA073459Volkswagen Amarok 2.0 BiTDI
03L906019FA1037510908Volkswagen Amarok
03L906019FA1037515253Volkswagen Amarok 2.0 TDI CR, Volkswagen Amarok CR 2011 Turbo, Volkswagen pcmflash
03L906019FA1037518108Volkswagen Amarok, Volkswagen Amarok CR 2011 Turbo, Volkswagen Amarok 2.0 BiTDI
03L906019FA1037526355Volkswagen Amarok, Volkswagen Amarok 2.0 BiTDI CR, Volkswagen Amarok 2.0 TDI CR
03L906019FA1037558512Volkswagen Amarok, Volkswagen Amarok 2.0 TDI CR, Volkswagen pcmflash
03L906019FA10SW073459 P755W5B5Volkswagen Amarok 2.0 TDI

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page