Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019FH / 1037535318

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019FH and software number 1037535318, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 102PS
Control unit
Bosch EDC17CP20
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906019FH
Software number
1037535318
Vehicle maker's hardware number
03L907309L

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 102PS
Power102.0PS / 75.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019FH
Software number1037535318
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Transporter 2.0 BiTDI CR
File keye3dabc4e00465af7
Identification read from the file
ECU nameEDC17CP20
Read typeCalibration only (data set)
Bosch part / software1037535318Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309LOffset in the file: 0x0582BE
Software / calibration03L906019FH · version 5609Offset in the file: 0x0582D8
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WU///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019FH and software number 1037535318. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen TransporterFlash4,096.00 KB€15Add to cart
Volkswagen TransporterFlash2,048.00 KB€15Add to cart
Volkswagen TransporterFlash4,096.00 KB€15Add to cart
Volkswagen TransporterFlash2,048.00 KB€15Add to cart
Volkswagen Transporter 2.0 TDIFlash2,048.00 KB€15Add to cart
Volkswagen T6 2.0 TDI CRFlash2,048.00 KB€15Add to cart

All reads of 03L906019FH / 1037535318

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019FH03L906019FHVolkswagen Transporter
03L906019FH1037522861Volkswagen T6 2.0 TDI CR, Volkswagen Transporter CR 2012 Turbo, Volkswagen T6
03L906019FH1037524652Volkswagen Transporter, Volkswagen pcmflash
03L906019FH1037525570Volkswagen Transporter, Volkswagen T6 2.0 TDI CR, Volkswagen Transporter CR 2013 Turbo
03L906019FH1037542256Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019FH10SW086157Volkswagen Transporter
03L906019FJ1037522862Volkswagen Transporter, Volkswagen T6 2.0 TDI CR, Volkswagen Transporter CR 2010 Turbo
03L906019FJ1037524651Volkswagen Transporter, Volkswagen pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page